ONE STEP

Menzerna Medium Cut Polish is the perfect polish for older paintwork, which has lost some of its natural oils can be difficult to correct without producing holograms and micro-marring. Medium Cut Polish 2400 contains lubricating oils to remove even severe blemishes such as sanding marks without leaving additional damage on the paintwork.

The Menzerna Power Finish PF2400 (PO203S) is a revolutionary polish in that it has excellent levels of cut yet high levels of gloss. Menzerna rate this polish as having the same cut levels as Intensive polish but with a higher gloss rating. In fact, we’ve found it’s got fractionally less cut, but definitely stunning gloss levels for a polish with this cut, even on hard paints.

Characteristics:

• Contains delicate abrasive particles & lubricating oils
• Can be worked for longer on older, dry & soft paintwork
• Filler-free formulation produces minimal drop-back

Specification:

• Water-based
• Filler-free
• Contains abrasive diminishing particles
• Suitable for use of soft, intermediate & hard paints
• Suitable for use with DA and rotary machines
• May also be applied by hand

How to use Menzerna 2400 Medium Cut Polish

• Ensure surface is clean, dry & cool to the touch
• Apply 2-3 pea-sized amounts to a medium/heavy polishing pad or lambswool pad, depending on the requirements of the job
• Place pad against paintwork & work at low speeds to spread the compound
• Work abrasives at medium speed (3-4 with a DA, 2-3 with a rotary)
• Wipe residue with a soft microfibre towel

Can I use Menzerna 2400 Medium Cut Polish by hand?

The compound is also suitable for manual polishing.
Apply the product on a manual polishing pad and polish it with circular movements to remove minor defects and add gloss.
Remove compound residue with a microfiber towel.